Linux version 2.4.22 (root@midas) (gcc version 3.2.3) #6 Tue Sep 2 17:43:01 PDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Slackware ro root=344 Initializing CPU#0 Detected 2605.981 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5203.55 BogoMIPS Memory: 515364k/524224k available (1813k kernel code, 8472k reserved, 614k data, 116k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfbc20, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0 PCI: Found IRQ 12 for device 00:1f.1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded Detected PS/2 Mouse Port. pty: 512 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 00:1f.1 PCI: Found IRQ 12 for device 00:1f.1 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA hda: WDC WD400BB-18DEA0, ATA DISK drive hdb: IBM-DJNA-352030, ATA DISK drive blk: queue c03a9d80, I/O limit 4095Mb (mask 0xffffffff) blk: queue c03a9ebc, I/O limit 4095Mb (mask 0xffffffff) hdd: ATAPI 52X CDROM, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: setmax LBA 78165360, native 78125000 hda: 78125000 sectors (40000 MB) w/2048KiB Cache, CHS=4863/255/63, UDMA(100) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 39876480 sectors (20417 MB) w/1966KiB Cache, CHS=2482/255/63, UDMA(33) hdd: attached ide-cdrom driver. hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 > hdb4 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 3002.400 MB/sec 32regs : 1986.000 MB/sec pIII_sse : 3412.000 MB/sec pII_mmx : 3027.200 MB/sec p5_mmx : 2940.000 MB/sec raid5: using function: pIII_sse (3412.000 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5+(22/07/2002) Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 116k freed Adding Swap: 506036k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,68), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,69), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,71), internal journal EXT3-fs: mounted filesystem with ordered data mode. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected an Intel(R) 865G, but could not find the secondary device. Assuming a non-integrated video card. agpgart: Detected Intel(R) 865G chipset agpgart: AGP aperture is 128M @ 0xe0000000 scsi0 : SCSI host adapter emulation for IDE ATAPI devices PCI: Found IRQ 5 for device 00:1f.5 PCI: Sharing IRQ 5 with 00:1f.3 PCI: Setting latency timer of device 00:1f.5 to 64 intel8x0: clocking to 48000 i810_rng: cannot disable RNG, aborting i810_rng hardware driver 0.9.8 loaded usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801EB USB2 ehci_hcd 00:1d.7: irq 3, pci mem e08da000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. PCI: 00:1d.7 PCI cache line size corrected to 16. ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 8 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Setting latency timer of device 00:1d.0 to 64 uhci.c: USB UHCI at I/O 0xac00, IRQ 12 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 uhci.c: USB UHCI at I/O 0xa000, IRQ 9 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 uhci.c: USB UHCI at I/O 0xa400, IRQ 10 usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.3 to 64 uhci.c: USB UHCI at I/O 0xa800, IRQ 12 usb.c: new USB bus registered, assigned bus number 5 hub.c: USB hub found hub.c: 2 ports detected hub.c: new USB device 00:1d.0-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x1241/0x1111) is not claimed by any active driver. usb.c: registered new driver usbmouse input0: USB HIDBP Mouse 1241:1111 on usb2:2.0 usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice