Linux and high performance routers ?


Results 1 to 7 of 7

Thread: Linux and high performance routers ?

  1. #1
    Join Date
    Apr 2003
    Posts
    220

    Linux and high performance routers ?

    As I am a computer networking student (Feb. 2011 = graduation month), I have been learning a lot about the subject. However, one thing puzzles me: all the networking hardware (i.e. routers, switches) I've learned about so far are made by Cisco. Most of those devices use the Cisco IOS.

    Does Linux have a presence in the (router/switch) market besides the home networking devices that can be flashed with a Nix OS? I.e. are there any high performance (distribution/core) switches that have Linux as their OS?

    Considering open standards such as OSPF, it seems odd to me that there isn't any Linux router's or switches.
    Last edited by Chess007; 06-16-2010 at 08:11 PM.
    Currently running Xubuntu & Blag.

    My blog:
    http://truthjournal.blogspot.com

    The Easy Guide to Installing debian:
    http://www.osnews.com/story.php?news_id=2016

  2. #2
    Join Date
    Jul 2002
    Location
    Vladivostok, Russia
    Posts
    9,054
    Do a Google on "linux embedded" + device name
    Cisco is a corporate entity...they are in the market to sell hardware and services.

    Here's a quote from an article:
    The Cisco IOS is no longer the only one possible for Cisco routers. It’s always good to have an alternative, right? The Linux zealots gave it to us: uClinux/Cisco (Embedded Linux/Microcontroller Project), which was developed to run on Cisco routers. This uClinux is a derivative of the Linux 2.0 kernel (intended for microcontrollers without memory management units) and has successfully been ported to Cisco. Koen De Vleeschauwer (author of one of the patches for uClinux) created a patch that allows uClinux to run on older MC68EC030-based Cisco routers, which is why the range of applicability of uClinux in Cisco isn't very wide. It includes Cisco 2500, 3000, and 4000 series routers and requires 4 MB of RAM.
    Last edited by JohnT; 06-16-2010 at 10:16 PM.
    "I was pulled over for speeding today. The officer said, "Don't you know
    the speed limit is 55 miles an hour?" And I said, "Yes, but I wasn't going
    to be out that long."

    How To Ask Questions The Smart Way
    COME VISIT ME IN RUSSIA NOW!!

  3. #3
    Join Date
    Sep 2002
    Location
    New York
    Posts
    280
    While slightly off topic, I built my own router a few months back using pfSense. Technically it's BSD based, and in my experience so far it is farrr superior to any consumer based router. It has a sick set of features... check it out.

    -- Devsforev

  4. #4
    Join Date
    Oct 2000
    Location
    Sweden
    Posts
    494
    There are several distros specialized for that purpose, as JohnT says.
    One I know is Bifrost developed in a Swedish University.
    In pingvino veritas!

  5. #5
    Join Date
    Jan 2003
    Location
    Austin, Texas
    Posts
    684
    Also check out www.ipcop.org (looks like it's on sourceforge now). I had a system like this in the past and it worked beautifully. Very simple to setup and manage.
    "The author of that poem is either Homer or, if not Homer, somebody else of the same name."

  6. #6
    Join Date
    Jan 2001
    Location
    Miami, Fl
    Posts
    134
    Juniper's JunOS is based on FBSD, and Foundry(Brocade now)'s OS is BSD based, as well.

    James

  7. #7
    Join Date
    Jul 2010
    Posts
    1
    Ericsson is using a customised version of SUSE known as ENUX (Ericsson Linux) in its Mobile Soft Switches.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •