Hardware:Configuration:SATA Hard Drive


Results 1 to 5 of 5

Thread: Hardware:Configuration:SATA Hard Drive

Hybrid View

  1. #1
    Join Date
    Nov 2000
    Location
    /dev/3.14Pie/HowRandom
    Posts
    6,697
    [SOLVED]

    [searching keywords]
    SATA serial drives

  2. #2
    Join Date
    Dec 1999
    Location
    Toronto
    Posts
    39,307
    You may be able to pass parms to the kernel during the installation process the same as was done for the ATA66/100 controllers back when they were not natively supported by the current kernel versions. (see the JL Help File on ATA66)

    Have you tried the SuSE Knowledgebase or searched G4L about installing to a SATA HD?
    SEARCH FIRST... ASK SECOND Read the JL 'Community Help Posting Guidelines' before posting in the forums.

    Precompiled Redhat NTFS Modules

    Linuxplanet Tutorials

    If Linux doesn't have the solution, you have the wrong problem. ... Please do not send me a PM asking for help...

    Please read the search suggestion thread in JL Ideas

  3. #3
    Join Date
    Dec 1999
    Location
    Toronto
    Posts
    39,307
    Originally posted by mysticboer
    I solved the problem by configuring the SATA drives as legacy rather than native in the BIOS.
    Good to know for the next time this question is posted.
    SEARCH FIRST... ASK SECOND Read the JL 'Community Help Posting Guidelines' before posting in the forums.

    Precompiled Redhat NTFS Modules

    Linuxplanet Tutorials

    If Linux doesn't have the solution, you have the wrong problem. ... Please do not send me a PM asking for help...

    Please read the search suggestion thread in JL Ideas

  4. #4
    Join Date
    Apr 2003
    Posts
    52

    SuSE 8.2 Pro & SATA Drives - how to install?

    My current box uses the MSI 875P Neo-FIS2R motherboard and v1.6 of the
    BIOS.

    My SATA and IDE devices are cabled as follows:
    IDE1 master = CD-RW
    IDE1 slave = ATA66 HDD
    IDE2 master = ATA100 HDD
    IDE2 slave = ATA100 HDD

    Serial ATA controlled by ICH5R:
    SER1 = SATA 160GB HDD
    SER2 = SATA 160GB HDD

    The BIOS is currently set to boot off IDE2 master.
    all drives are visible to the BIOS and accessible under windows xp,
    but I am unable to install SuSE 8.2 Pro on this box - basically when I
    boot from the SuSE CD and commence the installation it freezes. This
    has only occured since I installed the SATA drives.

    My understanding is that kernel 2.4.20 does not support SATA drives,
    hence the system freeze. Does anyone know how I can install SuSE 8.2
    Pro on this box without having to resort to opening the box and
    unplugging the SATA drives? Is it possible to boot the SuSE 8.2 Pro
    CD and then use a later version of the kernel for the installation?
    Last edited by mysticboer; 09-10-2003 at 11:42 PM.
    SuSE 9.1 Pro
    MSI 875P Neo-FIS2R
    ---
    "One of the penalties for refusing to participate in politics is that you end up being governed by your inferiors." - Plato

  5. #5
    Join Date
    Apr 2003
    Posts
    52
    I solved the problem by configuring the SATA drives as legacy rather than native in the BIOS.
    SuSE 9.1 Pro
    MSI 875P Neo-FIS2R
    ---
    "One of the penalties for refusing to participate in politics is that you end up being governed by your inferiors." - Plato

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •