ive recently brought a p4 with the motherboard, the board is a Abit IS7-E, according to manual the onboard is a realtek rtl8139/810x fast ethernet nic, so i have been usin, as root ofcourse

'modprobe 8139too'

this produces the error message
/lib/modules/2.4.22/kernel/drivers/net/8139too.o.gz: init_modules: No such device
/lib/modules/2.4.22/kernel/drivers/net/8139too.o.gz: Hint: insmod errors can be caused by incorrect module parameters, including invalid 10 or IRQ parameters
/lib/modules/2.4.22/kernel/drivers/net/8139too.o.gz: insmod /lib/modules/2.4.22/kernel/drivers/net/8139too.o.gz failed
/lib/modules/2.4.22/kernel/drivers/net/8139too.o.gz: insmod 8139too failed
so i search G4L and here a bit i found some information, which has got me a bit confused

for instance i found that i can find out if slackware can see my nic at all by doing lspci -v, but this produces the confusin information

02:02.0 Ethernet Controllers: 3Com Corportation: Unknown device 1700 (rev 12)
Subsystem: Abit Computer Corp: Unknown device 100a
Flags: bus master, 66 Mhz, medium devsel. latency 32, IRQ 10
Memory at f8000000(32bit, non-prefetchable) [size = 16k]
I/O Ports at 9000 [size = 256]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
this confuses me because as i can tell its sayin that it finds a 3Com card, or are they actually the same cards?

any suggestions or information about how to get this onboard RealTek RTL8139/810x to actually work

before i forget its a full install of slackware 9.1