Help & lead me to the end. VFS: readonly/fs couldn't mount.


Results 1 to 3 of 3

Thread: Help & lead me to the end. VFS: readonly/fs couldn't mount.

  1. #1
    Join Date
    Nov 2008
    Posts
    3

    Question Help & lead me to the end. VFS: readonly/fs couldn't mount.

    In a case of root=/dev/ram0 real_root=/dev/sda2
    No filesystem could mount root, tried: ext3 ext2...
    Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
    http://imageplay.net/img/tya22288136/IMG0204A.jpg (real_root - real panic)

    The case of omitting real_root and using just root=/dev/sda2
    VFS: Mounted root (ext2 filesystem) readonly on device 8:2
    http://imageplay.net/img/tya22288134/IMG0203A.jpg - after the last line hangs without panic (alt+sysrq+b helps)

    List of all partitions (befor kernel panic string):
    0800 62522712 sda driver: sd
    0801 204800 sda1 00000000-........0
    0802 53928280 sda2 0...............0
    0803 8388608 sda3 0........0
    panic.....
    Pid: 1, comm: swapper/0 Not tainted 3.4.9-gentoo #7

    But, firstly about my system (wgetpaste -c lspci)
    http://bpaste.net/show/50707/
    Code:
    # lspci
    00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge
    00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A)
    00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port B)
    00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C)
    00:0a.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port F)
    00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
    00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
    00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
    00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c)
    00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
    00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
    00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
    00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
    00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
    01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS] (rev a2)
    02:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
    03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12)
    04:00.0 USB controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 01)
    05:06.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
    http://bpaste.net/show/50727/
    http://bpaste.net/show/50703/
    http://bpaste.net/show/50705/
    .config :
    http://bpaste.net/show/50708/
    grub.conf
    http://bpaste.net/show/50709/
    /etc/fstab (May it be wrong without /shm?)
    http://bpaste.net/show/50710/
    http://bpaste.net/show/50711/
    http://bpaste.net/show/50721/
    /etc/portage/make.conf
    http://bpaste.net/show/50712/
    dmesg (right after boot from installation usb)
    http://bpaste.net/show/50726/

    And in the hope of "Chapter 7", Linux Sea - my case could be some overlooked controller for my SSD Crucial M4 64. I need to clarify SSD is different with HDD in Kernel Setup? Or slightly.. mb AHCI+SATA+RAID is a must chain? As I have an AMD (asrock mb) I couldn't find where is my missed option PIIX (Intel PIIX or AMD analogy).
    RAM and root file system support seem to be not very far from working system:
    http://imgur.com/a/VSsHV

    - genkernel failed in the save way (VFS). That's why i began my long path make && make_modules
    I've done the kernel without initramfs[*] and 2 partitions in ext2 (/boot ,/ ) in order to lessen the possibility of fail (esp on SSD). I can't fild those two in kernel except for Marvell:
    Code:
    00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
    00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
    03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12)
    I have no HDD only SSD and bootable flash minimal x86_64. Is an "PIIX4 PATA/SATA support" approprietable to me?
    Why bzImage is in arch/x86/boot/bzImage (x86_64 only links to x86). And what i'm doing - recompiling kernel again & again with replaceing with cp.


    Based on Pappy Kernel Seeds. ((Thanks to all you.. to this forum, the art of not being rude to ppl. with creative environment))

  2. #2
    Join Date
    Jun 2004
    Location
    Newcastle upon Tyne
    Posts
    2,978
    Why make life difficult by forcing a SSD not a normal hard disk? As far as the kernel is concrened a SSD is just another block device same as a hard disk. At least that is how I installed mine and I have never had any hang up.
    Linux user started Jun 2004 - No. 361921
    Using a Linux live CD to clone XP
    To install Linux and keep Windows MBR untouched
    Adding extra Linux & Doing it in a lazy way
    A Grub menu booting 100+ systems & A "Howto" to install and boot 145 systems
    Just cloning tips Just booting tips A collection of booting tips

    Judge asked Linux "You are being charged murdering Windoze by stabbing its heart with a weapon, what was it?" Replied Linux "A Live CD"

  3. #3
    Join Date
    Nov 2008
    Posts
    3
    People who started the very posts of flame&blame accidentally (one who didn't) helped me , his name is
    fargred
    http://www.linux.org.ru/forum/linux-...omment-8334625


    CONFIG_DEVTMPFS=y
    CONFIG_DEVTMPFS_MOUNT=y
    CONFIG_TMPFS=y
    I had no this option. CONFIG_DEVTMPFS_MOUNT=y
    http://www.500images.com/uploads/716230865.jpg

    MY SYSTEM IS ALIVE!
    And the result is:
    http://bpaste.net/show/50920/
    http://bpaste.net/show/50924/

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •