-
Jack MIDI not working after SB Liveinstall + remove
Hi list,
I tried installing a 'Soundblaster Live!' (model CT4670 ).
It was instantly recognised, but the motherboard soundcard dissapeared and I wanted to keep that.
After removing the Soundblaster and rebooting there is no Jack MIDI.
Mobo sound works again...
I'm on APODIO, wich is based on Mandrake.
mobo = A8V-E DELUXE
Thanks!
Tim
error message from jack :
10:23:33.164 Patchbay deactivated.
10:23:33.170 Statistics reset.
10:23:33.298 Could not open ALSA sequencer as a client. MIDI patchbay
will be not available.
ALSA lib seq_hw.c:455snd_seq_hw_open) open /dev/snd/seq failed: No
such file or directory
QMultiInputContext::changeInputMethod(): index=0, slave=xim
QMultiInputContext::changeInputMethod(): index=0, slave=xim
QMultiInputContext::changeInputMethod(): index=0, slave=xim
QMultiInputContext::changeInputMethod(): index=0, slave=xim
10:24:06.027 JACK is starting...
10:24:06.028 /usr/bin/jackd -dalsa -dhw:0 -r44100 -p1024 -n2
10:24:06.050 JACK was started with PID=3593 (0xe09).
cannot write to jackstart sync pipe 4 (Bad file descriptor)
jackd: wait for startup process exit failed
jackd 0.100.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw:0|hw:0|1024|2|44100|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 44100Hz, period = 1024 frames, buffer = 2 periods
Note: audio device hw:0 doesn't support a 32bit sample format so JACK
will try a 24bit format instead
Note: audio device hw:0 doesn't support a 24bit sample format so JACK
will try a 16bit format instead
nperiods = 2 for capture
Note: audio device hw:0 doesn't support a 32bit sample format so JACK
will try a 24bit format instead
Note: audio device hw:0 doesn't support a 24bit sample format so JACK
will try a 16bit format instead
nperiods = 2 for playback
10:24:08.262 Server configuration saved to "/home/toto/.jackdrc".
10:24:08.263 Statistics reset.
10:24:08.268 Client activated.
10:24:08.269 Post-startup script...
10:24:08.269 /usr/local/bin/jack_toggle.sh on
10:24:08.515 Post-startup script terminated successfully.
10:24:08.516 Audio connection change.
QMultiInputContext::changeInputMethod(): index=0, slave=xim
-
Maybe disable the onboard sound/midi in the CMOS reboot into <os> then enable sound/midi in CMOS and reboot again. See if that helps, otherwise run kudzu (if they still use it).
-
uh, sorry, being a newbie and all in Linux, I don't know how to disable the onboard sound/MIDI in the CMOS.
kudzu in terminal returns 'command not found'
thanks
-
ok I think you meant disabling the soundcard in the system setup of the motherboard, right ?
I did this, disable it, boot, shut down, reenable it, boot.
Still the same problem i guess:
14:40:34.610 Patchbay deactivated.
14:40:34.616 Statistics reset.
14:40:34.868 Could not open ALSA sequencer as a client. MIDI patchbay will be not available.
ALSA lib seq_hw.c:455snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory
QMultiInputContext::changeInputMethod(): index=0, slave=xim
QMultiInputContext::changeInputMethod(): index=0, slave=xim
QMultiInputContext::changeInputMethod(): index=0, slave=xim
QMultiInputContext::changeInputMethod(): index=0, slave=xim
14:40:41.319 JACK is starting...
14:40:41.319 /usr/bin/jackd -R -dalsa -dhw:0 -r48000 -p1024 -n2 -S -i2 -o6
14:40:41.329 JACK was started with PID=3554 (0xde2).
cannot write to jackstart sync pipe 4 (Bad file descriptor)
jackd: wait for startup process exit failed
jackd 0.100.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
apparent rate = 48000
creating alsa driver ... hw:0|hw:0|1024|2|48000|2|6|nomon|swmeter|-|16bit
control device hw:0
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
nperiods = 2 for capture
nperiods = 2 for playback
JACK: unable to mlock() port buffers: Cannot allocate memory
14:40:43.541 Server configuration saved to "/home/toto/.jackdrc".
14:40:43.542 Statistics reset.
14:40:43.547 Client activated.
14:40:43.548 Post-startup script...
14:40:43.548 /usr/local/bin/jack_toggle.sh on
cannot lock down memory for RT thread (Cannot allocate memory)
14:40:43.811 Post-startup script terminated successfully.
14:40:43.812 Audio connection change.
QMultiInputContext::changeInputMethod(): index=0, slave=xim
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|